Products

Hi-Temp Short Caps

Vinyl Short Caps are the most economic choice for masking products during most liquid painting and plating processes. The flexible vinyl stretches to form a tight seal over threads, beaded tubes, and odd shapes. Vinyl short caps also possess excellent chemical resistance to withstand most washing processes.

ID: Because Short Caps are soft and flexible, we suggest an undersized diameter for a tight fit. For example: if your outside diameter is .500" (12.70 mm), use a .437' (11.10 mm) Short Cap.

Length: Production Short Caps are available in any length, in .062" (1.57 mm) increments. Minimum length is .187" (4.75mm). Maximum length is stated in chart. Inside length tolerance is ± .062" (1.57 mm). Inside length is measured along the side wall to the radius of the closed end, not down the center. For stock lengths, please go to Stock S-Caps. For longer lengths, please go to Long Caps.

Wall thickness: Wall Thickness "C" is measured .250" (6.35 mm) from the open end,